IGBT Drivers
DI216-33-O-1
IGBT Drivers
| VCES [V]: | 3300 |
| Visol [V]: | 7200 |
| Iout [A]: | 16 |
| QG [uC]: | 10200 |
| Channels: | 2 |
| Top [°С]: | -40..+85 |
- 文書と証明書
- データシート DI216-33-O-1
- 使用の詳細 PDFを開く
- 説明
DI216-17-O-1 two-channel plug and play IGBT driver designed for IGBT modules type MIXM and voltage up to 1700 V. The advantage of plug & play drivers is that they are ready-to-use out of the box and do not require any conversion boards.
The maximum drive pulse current is +/- 16 A. The gate output voltage is +/- 15 V at the logic interface level. Insulation test voltage of 4 kV АС.
The driver can be operated in a wide temperature range from -40 to +85 °C.
The driver provides short-circuit protection of transistors and has a function of a soft IGBT shutdown that protects the transistor from destruction. The driver also has undervoltage protection.
Using drivers from the manufacturer of the IGBT modules guarantees the best compatibility taking into account specifics of these IGBT and saves time on selecting a suitable driver, while the cost of a mass-produced driver is much lower than a proprietary driver.
In addition, Proton-Electrotex offers ample opportunities for customizing the IGBT drivers at the request of the customer:
- Ability to change the input interface and pin configuration
- Possibility to select and install gate resistors for the customer’s operating modes
- Designing drivers for modules in parallel connection
- Designing a custom form factor for the customer's converter
- Driver setup for the customer’s operation mode
- Designing adapter / interface boards
For technical advice or purchasing the DI216-17-O-1 driver please contact our Sales Department.
- 用途
- Converters for solar and wind energy
- Uninterruptible Power Supply (UPS)
- Electric transport
- Frequency converter
- Active rectifiers
